The operation of the pulse dust collector is stable. The pulse dust collector is a dry dust collection device. It is suitable for capturing fine, dry, and non-fibrous dust. The filter bags are made of woven filter cloth or non-woven felt, and utilize the filtering effect of the fiber fabric to filter the dusty gas. When the dusty gas enters the pulse dust collector, the particles with large size and high specific gravity will settle down due to the force of gravity and fall into the ash hopper. The gas containing finer dust passes through the filter material, and the dust is retained, thereby purifying the gas.......

The spray tower is also known as the scrubber tower and is a type of waste gas treatment equipment. It is quite common in the application of waste gas treatment processes and is widely used in environmental protection projects for waste gas treatment. So, how should the spray tower be maintained and serviced during its daily use? Let's take a look: 1. Daily use of the spray tower The structure and components of the spray tower include the tower body, circulating water pump, circulating water tank, etc. During the installation process, only the ventilation pipes and fans need to be connected.......

Pulse Bag Dust Collector Operating Procedures (I) Local Operation: Switch on the power switch. The power indicator light will illuminate. Switch the local remote transfer switch to the local position (that is, rotate the switch all the way to the left). Press the fan start button. The fan will start running. Observe whether the fan direction is correct. Once the fan direction is normal, it can be put into normal dust removal operation. After a period of time, if cleaning and discharging of dust is needed (if there is an air compressor, turn on the air compressor first and then clean the dust), then press the "Dust Cleaning Start" button........

What is a spray tower or mist tower? Also known as a spray tower, it is an absorption tower without packing or trays inside, but with nozzles installed. The liquid enters from the top of the tower, and is sprayed into a mist or droplet form by the nozzles; the gas enters from the bottom of the tower, and comes into close contact with the mist or droplet form of the liquid for mass transfer, allowing the soluble components in the gas to be absorbed. The structure is simple, not prone to blockage, has low resistance, and is easy to operate and maintain. 1. Working principle: The acid mist exhaust gas is introduced into the purification tower through a ventilation duct........

A dust collector is a device that separates dust from the flue gas. Boiler dust collectors are commonly used as auxiliary equipment in boilers and industrial production. Its function is to remove the particulate smoke dust from the flue gas emitted by the boiler fuel, thereby significantly reducing the amount of smoke dust discharged into the atmosphere. This is an important environmental protection equipment for improving environmental pollution and enhancing air quality.

Solution to the fault: (1) The possible reasons for excessive operating resistance are: ① The filter bag is clogged; ② The pulse valve is not working or damaged; ③ The compressed air pressure is too low; ④ The lifting valve of the pulse valve does not close tightly during operation; ⑤ One or more lifting valves are in a closed state. Elimination methods: ① Clean the filter bag and enhance ventilation; ② Maintain or replace the pulse valve; ③ Check the air path and air compressor; ④ Check the cleaning controller......