The pulse bag dust collector is a new type of pulse bag dust collector that has been improved based on the traditional bag dust collector. To further enhance the performance of the pulse bag dust collector, the modified version retains the advantages of high purification efficiency, large gas processing capacity, stable performance, convenient operation, long filter bag lifespan, and low maintenance workload. Moreover, structural and pulse valve reforms have been carried out to solve the problems of outdoor placement and low pressure of the compressed air source........

1. The basic principle and function: For inorganic colloids with particle sizes ranging from 10 to 20 angstroms, dissolved organic macromolecular impurities, and residual chlorine, which are difficult to be removed during mechanical filtration, in order to further purify the raw water and make it meet the inlet water standards of the RO machine........

What are the dust removal equipment and methods in factory workshops? The cyclone dust collector is generally suitable for handling large particle size and high specific gravity dust. It has the characteristics of low one-time investment, simple operation and management, and convenient dust collection. The electrostatic precipitator has high purification efficiency, but it has high investment cost and high operating cost. The bag-type dust collector has the second-highest.......

Spray towers are commonly used in industrial dust purification and organic waste gas treatment, and are a frequently employed treatment equipment in waste gas processing. Here are 9 common problems and solutions for spray towers: 1. Cause of nozzle blockage: Excessive dust and impurities in the liquid in the water tank. Solution: First, check if the filter plate of the water tank is cracked, if the water pump inlet is equipped with a filter screen, and if the bottom filter screen of the water pump is damaged. If any of these problems exist, repair or replace them in time........

Components and characteristics of exhaust gas from electronic factory painting process The rapid development of the electronic industry has not only brought convenience to mankind, but also intensified environmental pollution. During the painting process, organic exhaust gases such as toluene, xylene, ethylbenzene, and ethyl acetate are produced. The characteristics of the exhaust gas from electronic factories: Characteristic 1: The main harmful substances include toluene, xylene, ethylbenzene, and ethyl acetate. They are mainly used as solvents or diluents for paints. Characteristic 2: During the painting process, the coating does not adhere to the surface of the products........

The sources and classification of waste gas in the fermentation industry (1) Exhaust gas from fermentation tanks (2) Exhaust gas from drying of fermentation residue (3) Exhaust gas in extraction tanks (4) Exhaust gas from pre-treatment of fermentation liquid and plate-and-frame filtration (5) Exhaust gas from wastewater treatment station, high-temperature exhaust gas during sterilization process before fermentation: high temperature (120℃), contains a large amount of water .......